Panasonic KX-TDA100 Programming Manual page 248

2.7 [1] Configuration
Programming Manual References
None
Feature Guide References
None
DSP Gain Adjustment—MFC-R2 Receive
Specifies the strength range within which an MFC-R2 signal must be for the DSP to recognise it as
an MFC-R2 signal.
Value Range
-38 - 0 dB – -23 - 0 dB
Maintenance Console Location
2.7.22 [1-1] Slot—E1 Card Property—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
Frame Error Detection—Error Detection
Specifies whether the PBX detects frame synchronisation errors.
Value Range
No, Yes
Maintenance Console Location
2.7.22 [1-1] Slot—E1 Card Property—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
Frame Error Detection—Error Rate
Specifies the number of frame errors per second which the PBX needs to recognise a remote alarm.
To enable this setting, Frame Error Detection—Error Detection on this screen should be set to Yes.
Value Range
No limit, 16 × n (n=1–7) errors/s
248 PC Programming Manual