Connect-Lan (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA100 Programming Manual

Hybrid ip-pbx

Hide thumbs Also See for KX-TDA100:

Table of Contents

Connect—LAN (KX-TDA100/KX-TDA200/KX-TDA600 only)

Connects to the PBX in Interactive mode through the Local Area Network interface of the PBX.

A CTI-LINK card must be installed and the IP address of the PBX set to use this feature. For more

details, see 2.7.42 [1-1] Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600

This option allows direct entry of connection parameters, for cases where the PC is used to connect

to one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to

multiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.4.13 Tool—

Profile Setup for more details about creating profiles.

To connect to the PBX by LAN

From the Connect menu, select LAN.

The Login window will be displayed.

Select a connection option.

Select the Use profile check box if you want to use a pre-saved profile.

Select the LAN radio button if you want to enter parameters manually.

Connection Settings for LAN (KX-TDA100/KX-TDA200/KX-TDA600 only)

PC Programming Manual

Select the profile to use from the drop-down list.

The Setup button will become unavailable.

If the system password for the PBX has not been stored with the profile, enter it.

If the system password has been stored with the selected profile, it does not need to be

Click Setup.

Modify the connection parameters as required. For more details, see the table below.

223.255.255.255

Specify the IP address of the PBX on the LAN.

Enter the same IP address that was input in IP

Address of 2.7.42 [1-1] Slot—CTI-LINK Card

Property (KX-TDA100/KX-TDA200/KX-

TDA600 only).

Specify the port number used to access the

PBX via LAN. Enter the same port number that

was input in Maintenance Port Number of

2.7.42 [1-1] Slot—CTI-LINK Card Property

(KX-TDA100/KX-TDA200/KX-TDA600 only).

Kx-tda30 Kx-tda200 Kx-tda600