Panasonic KX-TDA100 Programming Manual page 811

–
• 2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
–
–
–
• 2.7.31 [1-1] Slot—DID Port
–
–
–
Feature Guide Reference
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
• 2.16.2 [10-2] DIL Table & Port Settings—DIL
–
–
–
Feature Guide Reference
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• 2.7.30 [1-1] Slot—DID Card Property
• 2.8.4 [2-3] Timers & Counters—Miscellaneous—Receiving Dial Inter-digit Timer—DDI / DID
• 2.16.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
–
–
–
• 2.16.3 [10-3] DDI / DID Table
Feature Guide Reference
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• 2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
–
–
–
–
–
–
–
–
–
–
• 2.8.4 [2-3] Timers & Counters—Miscellaneous—Extension PIN—Lock Counter
CO Pulse Speed
Dialling Mode
DTMF Width
CO Pulse Speed
Dialling Mode
DTMF Width
CO Pulse Speed
DIL Destination—Day, Lunch, Break, Night
Tenant Number
VM Trunk Group
Distribution Method
DDI/DID/TIE/MSN—Remove Digit
DDI/DID/TIE/MSN—Additional Dial
DISA—Delayed Answer Timer
DISA—Mute & OGM Start Timer after Answering
DISA—No Dial Intercept Timer
DISA—2nd Dial Timer for AA
DISA—Intercept Timer—Day, Lunch, Break, Night
DISA—Disconnect Timer after Intercept
DISA—CO-to-CO Call Prolong Counter
DISA—CO-to-CO Call Prolong Time
DISA—Progress Tone Continuation Time before Recording Message
DISA—Reorder Tone Duration
3.2 Feature Programming References
PC Programming Manual 811