Panasonic KX-TDA100 Programming Manual page 264

2.7 [1] Configuration
Programming Manual References
None
Feature Guide References
None
Connection
Indicates the channel status (reference only).
This column offers two ways to open the screen to select the channel command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The channel is in service.
OUS: The channel is out of service.
Fault: The channel is not communicating with the network.
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Channel Type
Selects the channel type.
264 PC Programming Manual