1-1] Slot-Dph Port Command (Kx-Tda50 Only) - Panasonic KX-TDA50 Programming Manual

2.7 [1] Configuration
Programming Manual References
None
Feature Manual References
1.5.9 External Sensor
For Sensor (EIO)—Input Signal Detection Reopening Time
Specifies the length of time after the sensor has been triggered during which any further input from
the sensor will be ignored.
Default
10 s
Value Range
10 × n (n=1–255) s
Maintenance Console Location
2.7.29 [1-1] Slot—DPH Card Property (KX-TDA50 only)
Programming Manual References
None
Feature Manual References
1.5.9 External Sensor
2.7.30 [1-1] Slot—DPH Port Command (KX-TDA50 only)
Commands for the DPH ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.30 [1-1] Slot—DPH Port Command (KX-TDA50 only)
Programming Manual References
2.7.29 [1-1] Slot—DPH Card Property (KX-TDA50 only)
212 PC Programming Manual