Panasonic KX-TDA100 Programming Manual page 432

2.8 [2] System
PT Operation—PT Ring Off Setting
Specifies whether incoming call ringing can be turned off at individual extensions. If disabled, users
cannot prevent incoming calls from ringing.
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation
is established automatically when it receives a call from a trunk.
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.4.1.4 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button
is pressed while having a conversation.
Value Range
Disable (Disconnect), Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.10.5 [4-1-4] Wired Extension—Flexible Button
2.10.13 [4-2-3] Portable Station—Flexible Button
432 PC Programming Manual