Panasonic KX-TDA100 Programming Manual page 680

2.11 [5] Optional Device
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end
of a call and disconnect the trunk quickly.
Value Range
Disable (Release DISA): The DISA port of the message card is released when a trunk-to-private trunk
call using DISA is established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.11.3 [5-3-1] Voice Message—DISA System—Option 1—CO-CO with DISA—Fwd/Transfer to
Private Network
Feature Guide References
None
CO-CO with DISA—Fwd/Transfer to Public CO
Enables trunk-to-public trunk calls to be established using DISA.
Value Range
Disable: Trunk-to-public trunk calls are established without using DISA.
Enable (Get DISA): Trunk-to-public trunk calls are established using DISA, and DISA can be used to
detect the end of the call.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.11.3 [5-3-1] Voice Message—DISA System—Option 1—CO-CO with DISA—DISA to Public CO
Feature Guide References
None
CO-CO with DISA—Fwd/Transfer to Private Network
Enables trunk-to-private trunk calls to be established using DISA.
Value Range
Disable: Trunk-to-private trunk calls are established without using DISA.
Enable (Get DISA): Trunk-to-private trunk calls are established using DISA, and DISA can be used
to detect the end of the call.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
680 PC Programming Manual