Panasonic KX-TDA100 Programming Manual page 742

2.15 [9] Private Network
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network BLF Data Transmission for Centralised Operator Feature—Data
Transmission ISDN->VoIP
Selects whether to re-send BLF data received from an ISDN port through any VoIP ports that are set
to transmit BLF data.
Value Range
Disable, Enable
Maintenance Console Location
2.15.2 [9-2] Network Data Transmission
Programming Manual References
2.15.3 [9-3] Network Operator (VoIP)—IP-GW Card Slot No. to notify BLF data to Network Operator
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network BLF Data Transmission for Centralised Operator Feature—Data
Transmission Counter
Specifies the maximum number of "hops", or transmissions between two PBXs, before a packet of
BLF data is discarded.
Value Range
1–63
Maintenance Console Location
2.15.2 [9-2] Network Data Transmission
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network BLF Data Transmission for Centralised Operator Feature—Data
Broadcasting Interval Timer
Specifies the frequency of BLF data transmission. The PBX will send data over the network
periodically according to the interval specified here.
Value Range
100 × n (n=0–30) ms
742 PC Programming Manual