2.7 [1] Configuration
Value Range
Low, High
Maintenance Console Location
2.7.11 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Guide References
None
Reverse Detection
Selects the type of trunk call for which the reverse signal from the telephone company is detected.
Value Range
Disable: For no trunk call
Outgoing: For outgoing trunk calls only
Both Call: For both outgoing and incoming trunk calls
Maintenance Console Location
2.7.11 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Guide References
1.5.4.5 Reverse Circuit
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analogue trunk.
Value Range
Disable, Enable
Maintenance Console Location
2.7.11 [1-1] Slot—LCO Port
Programming Manual References
2.7.10 [1-1] Slot—LCO Card Property
Feature Guide References
1.18.1 Caller ID
152
PC Programming Manual