3-8-1] Vm(Dtmf) Group-System Settings - Panasonic KX-TDA100 Programming Manual

2.9.19 [3-8-1] VM(DTMF) Group—System Settings
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT ports
of the PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group. A maximum
of 2 (with the KX-TDA30/KX-TDA100/KX-TDA200) or 8 (with the KX-TDA600) VM (DTMF) Groups
can be programmed.
For more information on Voice Mail groups and DTMF integration, see "1.24.1 Voice Mail (VM) Group"
and "1.24.2 Voice Mail DTMF Integration" in the Feature Guide.
VM DTMF Status Signal—Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is ringing.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
2.9.19 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Status Signal—Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is busy.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
2.9.19 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Status Signal—Reorder Tone
Specifies the DTMF status signal the PBX sends to the VPS when the dialled number is invalid.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
2.9 [3] Group
PC Programming Manual 513