Panasonic KX-TDA100 Programming Manual page 815

• 2.7.31 [1-1] Slot—DID Port—Flash Time
• 2.8.8 [2-6-1] Numbering Plan—Main—Features—External Feature Access
• 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Flash Mode during CO
Conversation
• 2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.10.10 [4-2-1] Portable Station—Extension Settings—Option 6—Flash Mode during CO
Conversation
• 2.10.13 [4-2-3] Portable Station—Flexible Button—Type
• 2.10.17 [4-3] DSS Console—Flexible Button—Type
• 2.13.5 [7-5] Miscellaneous—TRS Check after EFA
Feature Guide Reference
1.11.7 External Feature Access (EFA)
External Relay Control
• 2.7.39 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)—Device Type
• 2.7.43 [1-1] Slot—DPH Card Property (KX-TDA30 only)—For Output (EIO)—Device Type
• 2.8.8 [2-6-1] Numbering Plan—Main—Features—External Relay Access
• 2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—External Relay
Access
• 2.11.6 [5-4] External Relay
Feature Guide Reference
1.17.10 External Relay Control
External Sensor
• 2.7.39 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
–
–
• 2.7.43 [1-1] Slot—DPH Card Property (KX-TDA30 only)
–
–
• 2.8.4 [2-3] Timers & Counters—Miscellaneous—External Sensor—Ring Duration
• 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others—External Sensor—Ring Tone Pattern
Plan 1–8
• 2.11.7 [5-5] External Sensor
Feature Guide Reference
1.17.9 External Sensor
F
Flash/Recall/Terminate
• 2.7.11 [1-1] Slot—LCO Port—Disconnect Time
• 2.7.19 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Disconnect Time
• 2.7.25 [1-1] Slot—E1 Port—Disconnect Time
• 2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Disconnect Time
• 2.7.31 [1-1] Slot—DID Port—Disconnect Time
Input Signal Decision Time
Input Signal Detection Reopening Time
For Sensor (EIO)—Input Signal Decision Time
For Sensor (EIO)—Input Signal Detection Reopening Time
3.2 Feature Programming References
PC Programming Manual 815