Panasonic KX-TDA100 Programming Manual page 184

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

2.7 [1] Configuration
Maintenance Console Location
2.7.14 [1-1] Slot—BRI Port
Programming Manual References
None
Feature Guide References
None
Port Type
Selects the port type.
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on
another PBX. ISDN extensions can belong to an incoming call distribution group or idle extension
hunting group. In this case, an MSN can be assigned.
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
2.7.14 [1-1] Slot—BRI Port
Programming Manual References
None
Feature Guide References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
Click the desired cell in the column.
Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.7.14 [1-1] Slot—BRI Port
Programming Manual References
2.7.15 [1-1] Slot—BRI Port—Port Command
184
PC Programming Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda600

Table of Contents