Panasonic KX-TDA100 Programming Manual page 573

Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.18 [2-10] Extension CID Settings—Extension Caller ID Resource-1, 2 (KX-TDA30 only)
Feature Guide References
1.18.1 Caller ID
SLT MW Mode (KX-TDA100/KX-TDA200/KX-TDA600 only)
Enables the use of the Message Waiting Lamp on an SLT extension connected to the extension port.
Value Range
Disable, MW-Lamp
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.19.1 Message Waiting
Wrap-up Timer
Specifies the length of time that must pass after completing a call before an extension will accept
another call when logged in as a member of an Incoming Call Distribution Group.
This timer is used when "Options—Wrap-up Timer based on" is set to "Extension" in 2.9.12 [3-5-
3] Incoming Call Distribution Group—Miscellaneous.
Value Range
0–3000 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.9.13 [3-5-4] Incoming Call Distribution Group—Member—Wrap-up Timer
2.9.12 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Wrap-up Timer based on
Feature Guide References
1.2.2.7 Log-in/Log-out
2.10 [4] Extension
PC Programming Manual 573