Panasonic KX-TDA100 Programming Manual page 613

CLIP ID
Specifies the CLIP number sent to the public network to show on the called party's telephone display
when making a trunk call.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.10.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
CLIP on Extension/CO
Selects the CLIP number to show on the called party's telephone.
Value Range
Extension: Show the CLIP number specified in CLIP ID on the Option 1 tab.
CO: Show the CLIP number specified in Subscriber Number in 2.7.14 [1-1] Slot—BRI Port or
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only).
Maintenance Console Location
2.10.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.7.14 [1-1] Slot—BRI Port—ISDN CO—Subscriber Number
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—Subscriber
Number
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—CLIP ID
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
CLIR
Specifies whether to restrict the display of the CLIP number on the called party's telephone when
making a public network trunk call.
Value Range
Disable, Enable
Maintenance Console Location
2.10.10 [4-2-1] Portable Station—Extension Settings
2.10 [4] Extension
PC Programming Manual 613