1-1] Slot-Extension Card Property - Panasonic KX-TDA100 Programming Manual

2.7.4 [1-1] Slot—Extension Card Property
The property for the extension cards can be specified.
KX-T7250 Transfer/Hold Key Mode
Selects whether the control signals sent by the Transfer and Hold buttons on KX-T7250 PTs are
reversed or not.
Value Range
Mode 1: Does not switch the control signals
Mode 2: Switches the control signals
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Card Property
Programming Manual References
None
Feature Guide References
None
SLT Pulse Dial Mode
Selects the type of pulse dial transmission appropriate to your area.
Value Range
Normal, Sweden, New Zealand
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Card Property
Programming Manual References
None
Feature Guide References
None
SLT Off Hook Time
Specifies the minimum length that a pulse dial sent from an SLT must be for the PBX to recognise it
as an off-hook signal.
Value Range
8 × n (n=3–255) ms
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Card Property
2.7 [1] Configuration
PC Programming Manual 119