Panasonic KX-TDA100 Programming Manual page 235

Programming Manual References
None
Feature Guide References
None
First Dial Timer (DDI/DID/TIE)
Specifies the minimum time that the PBX waits after seizing a DDI/DID or TIE line, before sending the
dialled digits to the telephone company or to another PBX. This allows the telephone company or the
other PBX to have enough time to accept the dialled digits correctly.
Value Range
32 × n (n=1–255) ms
Maintenance Console Location
2.7.21 [1-1] Slot—E1 Card Property
Programming Manual References
None
Feature Guide References
None
Answer Detection Timer
Specifies the length of time required by the PBX to recognise the answer signal. This allows the
telephone company to have enough time to accept the dialled digits correctly.
Value Range
32 × n (n=1–255) ms
Maintenance Console Location
2.7.21 [1-1] Slot—E1 Card Property
Programming Manual References
None
Feature Guide References
None
Seizure ACK Wait Timer
Specifies the length of time that the PBX waits for the seizure ACK signal.
Value Range
0.5 × n (n=1–20) s
2.7 [1] Configuration
PC Programming Manual 235