File; File-New - Panasonic KX-TDA100 Programming Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

2.2 File

2.2
File
2.2.1
File—New
Creates a new system data file, used to programme the PBX in Batch mode. All settings are in their
initial or default state.
This option is only available at Installer level.
To upload the file created here to the SD memory card installed in the PBX, see 2.5.2 Utility—File
Transfer PC to PBX (SD Card).
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will
overwrite all previous settings. Use only when necessary.
To create a new system data file
1.
From the File menu, select New.
2.
Click the appropriate model number.
3.
Select whether an EMEC (KX-TDA600) or MEC (KX-TDA30/KX-TDA100/KX-TDA200) card is
installed or not.
4.
Click OK.
38
PC Programming Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda600

Table of Contents