11-3] Power Failure Transfer (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA100 Programming Manual

2.17.3 [11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-
TDA600 only)
When the power supply to the PBX fails, power failure transfer (PFT) switches the current connections
to Auxiliary Connections, so that certain SLTs and trunks can be connected. Auxiliary Connections
allow trunk calls to be made during a power failure. Up to 6 pairs of trunk cards and extension cards
that are physically connected by RJ11 cable can be specified. The conversations through the lines
specified here will be maintained even when the power returns.
For the KX-TDA600, select the shelf for which to set connections from the Shelf list. Note that PFT
connections can only be made within the same shelf.
Trunk Card Slot No.
Specifies the position of the trunk card to be used.
Value Range
None, 1–11
Maintenance Console Location

2.17.3 [11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)

Programming Manual References
None
Feature Guide References
2.4.1 Power Failure Transfer
Extension Card Slot No.
Specifies the position of the extension card to be used.
Value Range
None, 1–11
Maintenance Console Location
2.17.3 [11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
2.4.1 Power Failure Transfer
2.17 [11] Maintenance
PC Programming Manual 793