Panasonic KX-TDA100 Programming Manual page 771

Maintenance Console Location
2.16.6 [10-4] MSN Table
Programming Manual References
2.7.14 [1-1] Slot—BRI Port
Feature Guide References
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
CLI for MSN
When CLI distribution is enabled for an ISDN-BRI line to which MSN distribution is set, incoming trunk
calls will be distributed to the CLI destinations (instead of the MSN destinations) if the caller's
identification number is found in the System Speed Dialling Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a trunk
basis.
Port
Indicates the port number of the BRI card that is set to MSN distribution (reference only).
Value Range
Port number
Maintenance Console Location
2.16.6 [10-4] MSN Table
Programming Manual References
None
Feature Guide References
None
CLI Ring for MSN—Day, Lunch, Break, Night
Enables CLI distribution in each time mode.
Value Range
Disable, Enable
Maintenance Console Location
2.16.6 [10-4] MSN Table
Programming Manual References
2.7.14 [1-1] Slot—BRI Port
Feature Guide References
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
1.1.1.5 Calling Line Identification (CLI) Distribution
2.16 [10] CO & Incoming Call
PC Programming Manual 771