Panasonic KX-TDA100 Programming Manual page 191

• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.7.14 [1-1] Slot—BRI Port
Programming Manual References
2.7.15 [1-1] Slot—BRI Port—Port Command
Feature Guide References
None
CCBS Type
Selects the type of the call from the network initiated by the CCBS (Completion of Calls to Busy
Subscriber) feature, from which the specified number of digits are deleted.
CCBS delete digits on this screen specifies the number of digits to delete from the received number.
Value Range
ALL, Unknown, International, National, Network specific, Subscriber, Abbreviated
Maintenance Console Location
2.7.14 [1-1] Slot—BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.10 Completion of Calls to Busy Subscriber (CCBS)
CCBS delete digits
Specifies the number of digits to delete from the received number when receiving a call of the
specified type initiated by the CCBS feature from the network. CCBS Type on this screen specifies
the applicable type of call.
Value Range
0–15
Maintenance Console Location
2.7.14 [1-1] Slot—BRI Port
Programming Manual References
None
2.7 [1] Configuration
PC Programming Manual 191