Panasonic KX-TDA100 Programming Manual page 115

IP-GW4 (KX-TDA0480/KX-TDA0484): 4-Channel VoIP Gateway Card
OPB3: Optional 3-Slot Base Card
CTI-LINK: CTI Link Card
IP-GW16: 16-Channel VoIP Gateway Card
IP-EXT16: 16-Port IP Proprietary Telephone Card
EECHO16: 16-Channel Echo Canceller Card
EMPR: MPR Card
Maintenance Console Location
2.7.2 [1-1] Slot—Summary
Programming Manual References
2.7.1 [1-1] Slot
2.7.4 [1-1] Slot—Extension Card Property
2.7.10 [1-1] Slot—LCO Card Property
2.7.13 [1-1] Slot—BRI/PRI Card Property
2.7.18 [1-1] Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.21 [1-1] Slot—E1 Card Property
2.7.27 [1-1] Slot—E&M Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.30 [1-1] Slot—DID Card Property
2.7.33 [1-1] Slot—IP-GW Card Property
2.7.39 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.42 [1-1] Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.43 [1-1] Slot—DPH Card Property (KX-TDA30 only)
Feature Guide References
None
Status
Indicates the card status (reference only).
Note that MPR card status is always displayed as "-".
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Pre-Install: A card has been added to the slot.
Idle: No card is installed in the slot.
Maintenance Console Location
2.7.2 [1-1] Slot—Summary
Programming Manual References
2.7.1 [1-1] Slot
2.7 [1] Configuration
PC Programming Manual 115