Programming Manual References
None
Feature Guide References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.7.31 [1-1] Slot—DID Port
Programming Manual References
2.7.32 [1-1] Slot—DID Port—Port Command
Feature Guide References
None
Dialling Mode
Selects the type of signal used to dial out to the DID line.
Value Range
DTMF, Pulse
Maintenance Console Location
2.7.31 [1-1] Slot—DID Port
Programming Manual References
None
Feature Guide References
1.5.4.4 Dial Type Selection
DTMF Width
Selects the length of the DTMF tone sent to the DID line.
2.7 [1] Configuration
PC Programming Manual
295