Panasonic KX-TDA100 Programming Manual page 67

Connection Settings for RS-232C
Setting
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate
Modem Initialise
Connection Settings for LAN (KX-TDA100/KX-TDA200/KX-TDA600 only)
Setting
IP Address
Port Number
Connection Setting for ISDN Remote
Setting
Dial Number
Values
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Values
1-9, 0, *, # and ","
[comma]
Auto(Tone),
Auto(Pulse), Manual
–
COMx
1200bps, 2400bps,
4800bps, 9600bps,
19200bps, 38400bps
–
Values
1.0.0.0–
223.255.255.255
10000–65535
Values
30 digits (consisting of
1-9, 0, *, # and ","
[comma])
Explanation
Specify the speed of data transmission.
Description
Enter the telephone number to be dialled to
access the PBX.
Specify the outgoing dialling method.
If Manual is chosen, dialling must be done with
a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialise command, and click
Initialise to send the command to the modem.
For more details, refer to your modem's
instruction manual.
Explanation
Specify the IP address of the PBX on the LAN.
Enter the same IP address that was input in IP
Address of 2.7.42 [1-1] Slot—CTI-LINK Card
Property (KX-TDA100/KX-TDA200/KX-
TDA600 only).
Specify the port number used to access the
PBX via LAN. Enter the same port number that
was input in Maintenance Port Number of
2.7.42 [1-1] Slot—CTI-LINK Card Property
(KX-TDA100/KX-TDA200/KX-TDA600 only).
Explanation
Enter the telephone number to be dialled to
access the PBX.
PC Programming Manual
2.4 Tool
67