Tool-Programmer Code Change - Panasonic KX-TDA100 Programming Manual

2.4 Tool
2.4.10 Tool—Programmer Code Change
Allows you to change the code used to log on to the Maintenance Console at startup.
This option is only available at Installer level.
It is possible to change the codes used for your level and below, but not codes used for higher levels.
Only codes that you can change will be displayed in the Programmer Code Change menu. For an
explanation of the Programmer Code levels, see 2.1.2 Access Levels.
The current code is displayed when the Programmer Code Change window opens.
The required length of each level's code is as follows:
Access Level
User
Administrator
Installer
To change a code
1.
From the Tool menu, select Programmer Code Change.
2.
Enter the new Programmer Code in the first box.
Make sure that the new code is the required length, and contains only ASCII characters.
3.
Re-enter the same code in the second box.
4.
Click OK to activate the new code.
62 PC Programming Manual
Programmer Code Length
0 – 16 characters
4 – 16 characters
4 – 16 characters