Panasonic KX-TDA100 Programming Manual page 269

Receiving Caller ID from TIE
Specifies whether Caller ID information is received when Channel Type on this screen is set to E&M-
P or E&M-C.
Value Range
No, Yes
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
Dial Tone to Extension
Enables the PBX to send a dial tone to an extension making a call when the network cannot send the
tone.
Value Range
Disable, Enable
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
2.7 [1] Configuration
PC Programming Manual 269