Panasonic KX-TDA100 Programming Manual page 335

• If the de-registration is successful, the dialog box will show "De-registration Succeed".
• If the de-registration is unsuccessful, the dialog box will show "De-registration Error".
De-registration will be terminated.
4.
Click Close.
If the PS is successfully de-registered, the status of the PS will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the PS when normal de-registration has been
unsuccessful or de-registration has been performed only on the PS.
1.
Click Forced De-registration.A dialog box will appear. Registered extension numbers are
displayed on the left.
2.
Highlight numbers and click the right arrow to select them for forced de-registration. Click
Next.
A dialog box will appear.
3.
Click OK.
A dialog box will appear.
4.
Click Confirm.
• If the de-registration is successful, the dialog box will show "Forced De-registration
Succeed".
5.
Click Close.
Once the PS is successfully de-registered, the status of the PS will update to show "None".
Personal Identification Number
Specifies the Personal Identification Number (PIN) of the PBX, used to avoid registering a PS to the
wrong PBX.
Note that the same PIN should be entered at the PS, before the PS is registered to the PBX.
Value Range
4 digits (consisting of 0–9)
Maintenance Console Location
2.7.45 [1-2] Portable Station
Installation Manual References
For KX-TDA30:
2.7.7 Connecting a Cell Station to the Hybrid IP-PBX
2.8.7 Connecting a Cell Station to the Hybrid IP-PBX
For KX-TDA100/KX-TDA200:
2.8.7 Connecting a Cell Station to the Hybrid IP-PBX
2.9.7 Connecting a Cell Station to the Hybrid IP-PBX
For KX-TDA600:
2.10.7 Connecting a Cell Station to the Hybrid IP-PBX
2.11.7 Connecting a Cell Station to the Hybrid IP-PBX
2.7 [1] Configuration
PC Programming Manual 335