2.7 [1] Configuration
2.7.9
[1-1] Slot—CSI/F Port—Port Command (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Commands for the CSIF ports can be programmed.
INS
Puts the Cell Station (CS) in service.
Value Range
Not applicable.
Maintenance Console Location
2.7.9 [1-1] Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.8 [1-1] Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
OUS
Takes the CS out of service. This enables a temporary non-use of the CS, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.7.9 [1-1] Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.8 [1-1] Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
136
PC Programming Manual