Removing And Installing Front Sealing Flange - Skoda Octavia Workshop Manual

13
------------ 13-18 -------------
Crank Assembly
Removing and installing front seal-
ing flange
Special tools, testers and aids required
♦ Torque wrench
♦ Thrust sleeve MP 1-231/1
♦ Guide sleeve T10053/1
(for PTFE seals)
♦ Guide sleeve MP 1-314
♦ Thrust sleeve T10053
♦ Locking lever T30004 or counterholder MP
1-310
♦ Hand drill with brush attachment
♦ Flat scaper
♦ Silicone sealant D176 404 A2
Removing
- Remove ribbed V-belt ⇒ page 13-5
K - Remove crankshaft toothed belt sprocket.
Lock toothed belt sprocket with locking le-
ver T30004 or counterholder MP 1-310.
Note:
When bolting on counterholder, place 2 wash-
ers between toothed belt sprocket and counter-
holder.
- Drain engine oil.
- Remove oil pan ⇒ page 17-3
- Unscrew front sealing flange.
- Remove sealing flange, if necessary release
by applying slight blows with a rubber-headed
hammer.
- Remove sealant residues on cylinder block
with a flat scraper.
OCTAVIA
Edition 04.03
S00.5127.54.20