Skoda Octavia Workshop Manual page 58

13
------------ 13-28 -------------
Crank Assembly
K Fig. 5 Inspecting cylinder bore
Special tools, testers and aids required
♦ Internal precision measuring instrument 50
to 100 mm
Inspection procedure
- Measure at 3 points diagonally across in
transverse direction -A- and in longitudinal
direction -B-
♦ Variations compared to nominal dimen-
sion max. 0.08 mm
Note:
The measurement of the cylinder bore must not
be performed when the cylinder block is at-
tached with Engine holder MP 1-202 to the re-
pair stand otherwise incorrect measurements
may result.
OCTAVIA
Edition 04.03
S00.5127.54.20