Skoda Octavia Workshop Manual page 30

13
------------ 13-4 -------------
Crank Assembly
Note:
K The tensioning device can be locked with a ∅
4.5 mm drift, about 55 mm long.
On models without headlamp cleaning system,
it is also possible to use the conrod support MP
1-225, for this purpose.
Installing ribbed V-belt
Notes:
♦ Inspect ribbed V-belt for wear.
⇒ Inspection and Maintenance; Descriptions
of operations; Ribbed V-belt - inspecting
condition
♦ Before installing the ribbed V-belt, ensure
that all the components (alternator, AC com-
pressor, hydraulic pump) are firmly installed.
♦ Inspect smooth running of belt pulleys and
tensioning pulley.
- Fit on ribbed V-belt.
K - Slacken tensioning device for ribbed V-belt.
Withdraw drift or conrod support MP 1-225
-arrows-.
- Start engine and inspect running of belt.
Note:
Engines with AC compressor are equipped with
a double ribbed V-belt.
OCTAVIA
Edition 08.99
S00.5127.50.20