Skoda Octavia Workshop Manual page 11

OCTAVIA
Edition 02.01
S00.5127.52.20
Removing and Installing Engine
K The two jacking points at the rear are located at
the rear of the two side members, at the level of
the marking on the sill.
K - Remove middle noise insulation panel -ar-
rows-. First of all remove air ducts on out-
side.
- Unbolt heat shield for right drive shaft.
- Remove drive shafts
⇒ Running Gear; Repair Group 40; Remov-
ing and installing drive shaft.
- Remove front exhaust pipe ⇒ page 26-1.
Note:
Avoid an excess of deflection of the decoupling
element at the front exhaust pipe (max. 10°).
4x4 models
- Detach prop shaft from gearbox
⇒ 5-Speed Manual Gearbox 02C; Repair
Group 39; Removing and installing prop-
shaft.
Continued for all models
K - Unscrew the protective cover -arrows- and
separate the plug connection (black) -1- to
the catalytic converter lambda probe -G39-.
- Unclip the cable to the lambda probe from
the guides.
10
------------ 10-3 -------------