Skoda Octavia Workshop Manual page 42

13
------------ 13-14 -------------
Crank Assembly
K Fig. 1 Seal versions
I Elastomer seal
1 sealing lip -1-; with worm spring
II PTFE seal
Several sealing lips -2-; without worm spring
Notes:
Do not moisten PTFE seal with oil before in-
stalling. The shaft must also be free of oil and
grease.
K Fig. 2 Locking flywheel
- Position the assembly device MP 1-504 on
the ring gear and turn until it rests against
the distance sleeve T30010.
K Fig. 3 Installing intermediate plate
- Attach intermediate plate to the sealing
flange and fit onto dowel sleeves -arrows-.
OCTAVIA
Edition 04.03
S00.5127.54.20