Skoda Octavia Workshop Manual page 33

OCTAVIA
Edition 04.03
S00.5127.54.20
Crank Assembly
Removing toothed belt
l Engine installed
Note:
If it is only necessary to remove the toothed belt
from a toothed belt sprocket or from
the toothed belt tensioning pulley, the engine
support as well as the engine mount
must not be removed.
- Removing ribbed V-belt and tensioning de-
vice ⇒ page 13-1.
- Remove the plug at the expansion reservoir
for coolant and activated charcoal filter hose.
K - Unbolt coolant expansion reservoir and PAS
reservoir -arrows-; hoses remain connected.
K - Removing engine cover -2-.
Slacken nut -1- , pull out oil dipstick -3- and
pull the front engine cover upwards with a
sudden motion -arrows-.
- Removing top part of toothed belt guard.
K - Insert supporting device MP 9-200.
- Slightly lift up the engine with the spindle of
the supporting device MP 9-200
Note:
Tie up the coolant expansion reservoir and the
PAS reservoirs to the supporting device.
13
------------ 13-7 -------------