Skoda Octavia Workshop Manual page 48

13
------------ 13-20 -------------
Crank Assembly
Notes:
♦ If a PTFE seal is fitted (⇒ page 13-14, Fig.
1, the crankshaft journal must be free of oil
and grease and the seal must be oiled.
K ♦ Use the following devices for fitting on the
sealing flange with the seal installed:
- Elastomer - MP 1-314
- PTFE seal - T10053/1
- Tighten fixing bolts of sealing flange diago-
nally across.
Tightening torque: 15 Nm
- Install oil pan ⇒ page 17-4.
Note:
After installing, allow the sealant to dry for about
30 minutes. Do not pour in any engine oil during
this waiting period.
- Install toothed belt ⇒ page 13-5
OCTAVIA
Edition 04.03
S00.5127.54.20