Skoda Octavia Workshop Manual page 72

15
¡ ¢ £
------------ -------------
¤ ¥ ¦ § ¨ ©   
  ! " # $ % & & $ ' (
Cylinder Head/Valve Gear
3 4 & 5 " 6 7
♦ Ring inserter MP 1-214
♦ Ring extractor MP 1-215
♦ Counterholder T30004
♦ Torque wrench 5...50 Nm
(e.g. V.A.G 1331)
♦ Torque wrench 40...200 Nm
(e.g. V.A.G 1332)
- Remove top part of toothed belt guard.
K - Rotate crankshaft and position camshaft
sprocket to TDC marking of cyl. 1. Marking
on camshaft sprocket must be aligned with
arrow on toothed belt guard.
- Slacken tensioning pulley and take off
toothed belt.
- Turn back crankshaft slightly.
K - Remove camshaft sprocket. Hold camshaft
sprocket tight with counterholder T30004 to
slacken the bolt (unscrew bolts -arrows- first
of all).
- Remove parallel key from the camshaft.
- Screw bolt attaching camshaft sprocket into
the camshaft as far as the stop.
- Position inner part of seal extractor MP
1-215 flush with the outer part and lock with
knurled screw.
   ¨    ¥ ¨ §
© ¨
# " 0 ' 1 2 " ) 0
% ' %
) ' )
and
OCTAVIA
Edition 08.99
S00.5127.50.20