Skoda Octavia Workshop Manual page 143

¡ ¢ £ ¤ ¥ £ ¦ § ¡ ¨ © ©
 ¤  £ ¦ 
OCTAVIA
Notes:
♦ When carrying out removal and installation
operations on the exhaust system, ensure
that the exhaust system is not installed with
a pre-stress and that there is adequate clear-
ance to the body. If necessary, slacken the
double clamps and align silencers and ex-
haust pipe so that adequate clearance ex-
ists to the body exists at all points and the
weight of the exhaust system is evenly dis-
tributed over the hangers.
♦ Always replace self-locking nuts.
Edition 01.02
S00.5127.53.20
      
" # $ % 

Exhaust System
)  0 1 2 '
3 4 2 '

5 $ ( ( #     6
4 
1
7   6  8
♦ installed as standard with part -7-;

supplied separately for repairs
9  &  @    !  
♦ exhaust pipe with separation point

⇒ page 26-7.3
♦ align free of stress
2
♦ installation position: bolted connection
points to the left; installation position
marked by three lugs on centre si-
lencer
♦ tighten bolts evenly
4
6
♦ installed as standard with part -1-; sup-
plied separately for repairs
♦ exhaust pipe with separation point
⇒ page 26-7.3
   !  
! & ' (
( &  
s
26
A B C D E A
------------ -------------