Cooling System Page; Removing And Installing Parts Of The Cooling System; Parts Of The Cooling System - Skoda Octavia Workshop Manual

OCTAVIA

Removing and installing parts of the cooling system

Parts of cooling system
Notes:
♦ When the engine is warm, the cooling sys-
tem is pressurized. Release pressure, if nec-
essary, before commencing repairs.
♦ Hose connections are secured with spring
strap clamps. Use only spring strap clamps
when carrying out repairs.
♦ It is recommended to use the pliers for spring
strap clamps for removing and installing such
clamps.
♦ Always replace seals and gaskets.
♦ When installing coolant hoses, route them
free of stress and ensure they do not touch
other components (pay attention to marking
on coolant connection and on hose).
♦ Draining and filling system with coolant
⇒ page 19-2.
♦ Coolant mixing ratios ⇒ page 19-3.
♦ Testing cooling system for leaks ⇒ page
19-5.
Edition 08.99
S00.5127.50.20
Cooling System
1 - Radiator
♦ After replacing, fill complete system
with fresh coolant
2 - Oil cooler
♦ Removing and installing
⇒ page 17-3, item 17
3 - Coolant thermostat
♦ Removing and installing
⇒ page 19-12
♦ Testing, data ⇒ page 19-12
4 - Coolant pump
♦ Removing and installing
⇒ page 19-10
♦ Inspect for smooth running
5 - Cylinder block
6 - Expansion reservoir
7 - Intake pipe
8 - Coolant pipe
♦ At cross panel
9 - Throttle valve control unit
10 - Heating system heat exchanger
11 - Quick-coupling
12 - Coolant pipe
♦ At engine
13 - ATF cooler
♦ Only fitted to models with automatic
gearbox
19
------------ 19-1 -------------