Skoda Octavia Workshop Manual page 141

OCTAVIA
Edition 02.01
S00.5127.52.20
Exhaust System
- Align centre and rear silencer horizontally:
- The hanger bolt at the exhaust pipe must
K
be positioned parallel to the tunnel bridge
(dimension -X- on left and right the same).
Note:
On vehicles with separation point ⇒ page 26-5,
additionally check horizontal position of rear si-
lencer at the tail pipe.
K - Position double clamp spaced about 5 mm
¤ ¥ ¦ § ¨ ©   ¥ 
    ¨   ¦
away from the marking at front exhaust pipe
with catalytic converter, and tighten evenly
in horizontal position to 40 Nm.
♦ Marking S -arrow 1- for models with
manual gearbox
♦ Marking A -arrow 2- for models with au-
tomatic gearbox
- Start engine and run at idling speed.
- Seal off tail pipe for the duration of the leak
test (e.g. with cloths or plug).
- Inspect connection points for leaks, by lis-
tening: cylinder head/exhaust manifold/ex-
haust pipe with catalytic converter, etc.
- Rectify any leakages found.
exhaust system
26
¡ ¢ £
------------ -------------