Operation For Multi-Up Printing - Riso MZ790U Instruction Manual

Functions for Master-Making

Operation for Multi-Up Printing

1
Select a color mode.
Select 1-Color or 2-Color print.
Note:
• See "p.23 for how to select a color mode.
2
Place an original and load paper.
If you set the original and print paper prior to set-
ting "Multi-Up Print", the printer will automatically
set the size ratio.
See an explanation of the various modes for infor-
mation on the respective ways to set the original.
• When 2-Color printing with 2 originals "p.38
• When printing with 1 color "p.57
Note:
• Pay attention to the orientation of the original.
"p.86
Placing an original when setting is
!
"Single-Original"
When using 2 originals for 2-color printing,
place the original to be printed in the color of
Cylinder (Drum) 1 face down
Placing an original when setting is
!
"Multiple-Original"
When scanning 2 originals in 2-Color mode,
follow the steps below.
1)
Original 1 being printed in the color of Cyl-
inder (Drum) 1
2)
Original 2 being printed in the color of Cyl-
inder (Drum) 1
3)
Original 1 being printed in the color of Cyl-
inder (Drum) 2
4)
Original 2 being printed in the color of Cyl-
inder (Drum) 2
After scanning all of the originals noted above,
masters are created one after the other on Cyl-
inder (Drum) 1 and Cylinder (Drum) 2.
When placing original on the
!
stage glass:
Place "Original 1-1) being printed in the
color of Cylinder (Drum) 1" face down.
92
Printing Side-by-Side on One Sheet [2 Up] [Multi-Up Print]
When placing within ADF unit
!
(option):
You can place all originals together. To do
so, place face down in the order shown
below.
Original orientation
1)
2)
3)
4)
3
Touch [Functions] on the Master
Making Basic Screen.
4
Touch [Multi-Up Print].