Riso MZ790U Instruction Manual page 175

12
Touch [OK] when done.
Note:
• To change a name, repeat from step 8.
13
Confirm the name and touch
[Close].
The following screen appears.
Returns to the Admin. screen. Paper size is
updated.
Tip:
Printing on Extended Paper
The machine can print on paper 17.2"-21.9" (436
mm-555 mm) long (top to bottom facing the paper
feeding direction) by storing the size as a custom-
size.
When entering a size longer than 17.2" (436 mm)
(top to bottom facing the paper feed direction) on
the Custom Paper Entry screen, the paper will be
treated as "Extended Paper".
When "Extended Paper" is selected on the Cus-
tom Paper Entry screen, the machine switches
into "Extended Paper" mode.
Important!:
• Some Extended Paper may fail to pass through
the machine due to its paper characteristics, or
may get smudged with ink due to its image posi-
tioning. Consult your dealer (or authorized serv-
ice representative) for advice.
"Extended Paper" Mode
• When the machine is on "Extended Paper"
mode, it is indicated in the message area as
either "Ready to Make Master <Ext.Paper>" or
"Ready to Print <Ext.Paper>".
• On "Extended Paper" mode, the machine can
print papers measuring 17.2"-21.9" (436 mm-
555 mm) lengthwise from top to bottom facing
the paper feed direction. However, maximum
printing area and top/bottom Print Positioning
range remains as usual.
"p.17
"p.115
• Print timing and speed is different on "Extended
Paper" mode in comparison to normal printing.
This is to be expected, so do not be alarmed.
• Contact your dealer (or authorized service rep-
resentative) for suggestions about placing
paper on the Paper Receiving Trays when on
"Extended Paper" mode.
Registering a Custom Paper Size [Custom Paper Entry]
Advanced Features
175