Idling Action [Idling Action] - Riso MZ790U Instruction Manual

Advanced Features
Idling Action
When the machine has not been used for an extended period of time, or when the Print Cylinder (Drum) is replaced,
the first several copies may be printed too light. By performing "Idling Action" before making a master, high print qual-
ity may be instantly achieved and reduce paper waste.
Important!:
• "Idling Action" is effective only in conjunction with the master-making process. When performing print processes
only, "Idling Action" will have no effect.
Note:
• If both Cylinder (Drum) 1 and Cylinder (Drum) 2 are set, you can select "Idling Action" for either.
• If you are only using Cylinder (Drum) 1 or Cylinder (Drum) 2, the "Idling Action" is only applied to the cylinder (drum) that is set.
• To perform "Idling Action" automatically when making a master after a specified period of time since the last print
job, set "Auto Idling" on the Admin. screen. Idling Rotation can be set from 1 to 3.
"p.163
1
Touch [Functions] on the Master
Making Basic Screen.
2
Touch [Idling Action].
appears on screen.
152

Idling Action [Idling Action]

[Idling Action]
3
Press the
Note:
• Be sure to set the original in place and confirm
settings before pressing the
The following screen appears.
After "Idling Action" has been finished, the master-
making process is started.
key.
key.