Table of Contents
Advertisement
Getting Acquainted
Control Panel
The Control Panel features permanent keys such as
ious messages and function buttons.
This section introduces hardware Key names and functions, as well as the display window and its functions.
1)
Mode Key
Use to change modes.
2)
Display ("p.22 ∼p.28)
3)
Print Quantity Display
Displays the number of copies, or numeric values
entered for various settings.
4)
P Key ("p.128)
Use to retrieve stored programs. The indicator on the key
lights when set.
5)
×Key ("p.128)
Use to move between fields in setup screens, or set up
programed printing.
6)
+ Key ("p.128)
Use to move between fields in setup screens, or set up
programed printing.
7)
C Key
Cancels entered numerical values, or reset the counter
to 0.
8)
Print Quantity Keys (0 to 9 Keys)
Use to enter the number of copies, or the numerical val-
ues for various settings.
9)
Key ("p.128, "p.142)
Use to move between items in a setup screen, or retrieve
stored memory.
20
Control Panel
and
1
2
10)
11)
12)
. It also has a large-size display that shows var-
9
Print Speed Adjustment Keys/Indicator
("p.112)
Select the print speed from five levels.
The indicator above the keys shows the current speed
level.
Print Density Adjustment Keys/Indicator
(For Cylinder (Drum) 1, For Cylinder (Drum) 2)
("p.114)
Select the print density from five levels.
The indicator above the keys shows the current density
level.
Print Position Adjustment Keys/Indicator
(For Cylinder (Drum) 1, For Cylinder (Drum) 2)
("p.115)
Adjust the print position in the vertical direction (within
"
±
/
(±15 mm)) and/or in the horizontal direction
19
32
/
"
(within ±
(±10 mm)) after creating a master.
3
8
The indicator above the keys shows the offset amount
from the center.
To clear the offset amount, press
3
4
8
7
6
5
.
Advertisement
Table of Contents
Troubleshooting
