Connection With A Computer - Riso MZ790U Instruction Manual

Connection with a Computer

You can directly send data from a connected computer to the machine as an original for printing. Because digital data
itself is used for making a master, the finish of prints becomes outstanding.
Important!:
• Before making the connections, turn off both the machine and computer.
• The maximum allowable voltage for parallel connector input and output is 5 V.
Connection Method
One-to-one connection
with a Windows PC
One-to-one connection
with a Macintosh
(Windows PC also
acceptable)
Network connections
Option Needed
—
RISORINC-NET
RISORINC-NET
Parallel printer cable
Ethernet cable (cross)
Ethernet cable (straight)
Before Starting to Use
Cable
IEEE1284 conformed
Shielded cable that
supports 10BASE-T or
100BASE-TX
Connection with a Computer
13