Riso MZ790U Instruction Manual page 245

Message
Printing is Not Available
for This Setting with
Print Cylinder 2
Set Print Cylinder to be
Used in Cylinder Position 1
and Re-select Printing Mode
Processing Other Operation
Retry after a while
Processing Print Data
from PC
Scanning Mode is Not
Available while Process-
ing Current Data
Processing Print Data
from PC
This Function is Not
Available while Process-
ing Current Data
Starting Up RISORINC-NET
Please Wait a Moment
!! Unmatched Color --
Data Color and
Cylinder Color 1 !!
Change Print Cylinder
!! Unmatched Color --
Data Color and
Cylinder Color 2 !!
Change Print Cylinder
!! Unmatched Color --
Data Color and
Cylinder Colors !!
Change Print Cylinders
!! Unmatched Size--
Current Page and
Printing Paper !!
Check Paper Size
Symptom
Cylinder (Drum) 2 may be used for
single color printing, but certain
limitations apply. Current settings do
not support single color printing with
Cylinder (Drum) 2.
Color separation cannot be performed
while system is busy processing another
operation.
The machine is receiving the document
data from the computer.
While the data is being transmitted, Link
Mode printing and Scan mode are
disabled.
RISORINC-NET is starting up.
The color of the cylinder (drum) is
different from the color specified on
printer driver.
The original data sent from the computer
does not match the print paper size.
Troubleshooting
Action
Touch [Close].
Remove Cylinder (Drum) 2 from its
current position, and replace it in place
of Cylinder (Drum) 1.
Please wait until the current operation is
completed.
Touch [Close].
Initiate the Print job after the
transmission is complete, or print from
the machine.
Touch [Close].
(Alternatively, press the
key to clear.)
Please wait a moment.
Alternatively, print from the machine.
• To ignore printer driver setting and to
print with the color currently installed
on the cylinder (drum), touch
[Continue].
• To change color, touch [Cancel] and
replace cylinder (drum).
• When resuming the print job;
Touch [Continue].
(Alternatively, press the
print.)
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
Check the print paper size and change
paper or size as needed.
When a Message Displays
key or the
key to
key or
245