Ejecting Paper Using Pre Configured Setting [Jump Wing Control] - Riso MZ790U Instruction Manual

Functions for Printing
Ejecting Paper Using Pre Configured Setting
[Jump Wing Control]
The following steps retrieves pre-configured custom settings for the Paper Jumping Wing. Use this feature to eject
certain printing paper that is hard to eject with automatically adjusted normal Paper Jumping Wing setting.
Important!:
• "Jump Wing Control" feature is not available unless pre-config-
ured.
• Only one setting can be pre-configured.
• To pre-configure or to change settings, please contact your dealer
(or authorized service representative).
Note:
• The Paper Jumping Wing is a device which helps eject printed
paper onto the Paper Receiving Tray.
It automatically adjusts according to the position of the Paper Feed Pressure Adjustment Lever (standard or thick).
1
Touch [Functions] on the Print Basic
Screen.
2
Touch [Jump Wing Control].
"Jump Wing Control" is selected.
122

Ejecting Paper Using Pre Configured Setting [Jump Wing Control]

Paper Jumping Wing