Scanning Originals (2) For 2-Color Printing - Riso MZ790U Instruction Manual

Scanning Originals (2) for 2-Color Printing

Originals from Cylinder (Drum) 1 and Cylinder (Drum) 2 are read and stored as one piece of data.
1
Select a scan mode.
See "p.23 for information about selecting a scan
mode.
2
Place the Original for Cylinder
(Drum) 1.
See step 5 of "2-Color Printing" ("p.39).
Procedures are the same for using the ADF unit
(option).
Go to step 4 if you are not specifying folder, data,
or owner name. If no settings are configured, data
is stored by default (Data Name: scan_001, Save
Location:1_folder, Owner:Owner-1).
3
Set data information.
Sets the data name, save location and owner name.
"p.185
4
Touch [Functions].
Storage and Scan Modes (Option)
5
Touch [Color].
The Color screen appears.
6
Touch [Dual-Color].
7
Check the cylinder (drum) color.
To change the ink colors on Cylinder (Drum) 1 and
Cylinder (Drum) 2, touch [Change] for each and
choose from among the displayed colors.
Note:
• The previously set color name displays on the
Change screen.
Converting Hard-copy to Stored Data (Scan Mode)
183