Riso MZ790U Instruction Manual page 40

Basic Operations
Important!:
• The ADF unit can accommodate originals of
" × 5
3 / /
9 1
16 2
Smaller originals should be placed on the
Stage Glass.
• Do not place multiple originals of differing sizes or
otherwise unsuitable originals into the ADF unit.
Doing so can cause paper jams and damage
the machine.
"p.14
• Once the original is placed into the ADF unit,
"Auto Process" setting is turned ON. Press the
key to turn it OFF.
Default "Auto Process" setting for the ADF unit
can be changed on the Admin. screen.
"p.161
Tip:
When placing multiple sets of originals in the
ADF unit
If you want to set multiple sets of originals of 2
sheets per set (for Cylinder (Drum) 1 and Cylinder
(Drum) 2), place as indicated below.
• In each set, place the originals for Cylinder
(Drum) 1 on top and the originals for Cylinder
(Drum) 2 on bottom.
• Place so that the last set is on top and the first
set is on bottom.
Ex.)
To create a total of 2 dual-colored sheets, place a
total of 4 sheets as shown in the diagram below.
B
A
1st set
D
C
2nd set
40
2-Color Printing with 2 Originals
" (90mm × 140 mm) and above.
2nd set
1st set
C D A B
Note:
• Up to 50 sheets of 17-lb bond (64g/m
can be placed in the ADF unit.
6
Configure print functions.
In the Master Making Basic Screen, select func-
tions as needed. See the item for each printer
function for further information about print func-
tions. If it is not displayed, press
the Master Making Basic Screen.
7
Press the
The scan of the original for Cylinder (Drum) 1
begins.
Once the scan has completed, the master is made
for Cylinder (Drum) 1.
) paper
2
to display
key.