Riso MZ790U Instruction Manual page 184

Storage and Scan Modes (Option)
8
Touch [OK].
The color specified for the original is confirmed
and the screen returns to the Scan Basic Screen.
9
Apply the required settings to the
original for Cylinder (Drum) 1.
Set the required functions for scanning the origi-
nal.
Note:
• See ("p.180) for the functions that can be set.
• You can instantly check scanned data by ena-
bling "Preview".
Important!:
• Set "Format" when scanning custom originals.
("p.187)
10
Press the
Scan of the original for Cylinder (Drum) 1 starts.
Note:
• After scanning the original, a preview appears
on the display if "Preview" is set.
184
Converting Hard-copy to Stored Data (Scan Mode)
key.
11
Place the original for Cylinder
(Drum) 2.
Step 8 of "2-Color Printing with 2 Originals"
("p.41)
This step is not needed if the originals for Cylinder
(Drum) 1 and Cylinder (Drum) 2 are placed
together on the ADF unit (option).
12
Apply the required settings to the
original for Cylinder (Drum) 2.
13
Press the
Scan of the original for Cylinder (Drum) 2 starts.
Note:
• A preview appears on the display if "Preview" is
set.
14
Repeat steps 2, and 9-13 if the origi-
nal has multiple pages.
15
Touch .
Once the original to be saved as one set of data is
scanned, touch .
A confirmation screen appears.
16
Touch [Yes].
The data is saved.
Press the key to exit scan mode.
key.