Table of Contents
Advertisement
Troubleshooting
Message
Original Undetected
Reset Original
!! Outlines of Editing Areas
are Too Long !!
Divide Large Areas into
Several Smaller Areas and
Redo Color Separation
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Continue->PROOF Key)
Printer Temperature is Low
"150ppm" is Not Available
Printing is Not Available
for This Paper Size with
Print Cylinder 2
Set Print Cylinder to be
Used in Cylinder Position 1
and Re-select Printing Mode
244
When a Message Displays
Symptom
The machine failed to detect the original
document. The original document may
not be placed.
Selected area is too large.
The printing paper is smaller than the
Master.
The printing paper is smaller than the
Master.
Current temperature is too low for
"150ppm" printing.
Cylinder (Drum) 2 may be used for
single color printing, but only on certain
paper size. Paper size currently loaded
does not support single color printing
with Cylinder (Drum 2).
Action
Re-position the original to clear the Pop-
Up Message.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the
key to clear.)
Reduce the size, or select smaller
areas.
• To override the message and to print
with possible ink smears on the roller;
Touch [Continue].
(You can also print by pressing the
key or the
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the
key.)
Load the correct size printer paper.
• To override the message and to print
with possible ink smears on the roller;
Press the
key.
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the
key.)
Load the correct size printer paper.
You may operate the machine with
regular speed by touching [Continue],
until temperature within the machine
reaches 59°F (15°C).
To return to Print Basic Screen, touch
[Cancel].
Touch [Close].
Remove Cylinder (Drum) 2 from its
current position, and replace it in place
of Cylinder (Drum) 1.
See "p.14 for paper size limitation
when printing single color using Cylinder
(Drum) 2.
key to print.)
key or
key.)
Advertisement
Table of Contents
Troubleshooting
