Riso MZ790U Instruction Manual page 117

Note:
• If both cylinders (drums) were adjusted sepa-
rately, it is adjusted to match the position of the
last-adjusted cylinder (drum).
Tip:
Making Fined Adjustments to the Print Posi-
tion
If the settings are such that "Fine Adjust Mode"
can be set, the print position can be finely
adjusted in / " (0.1 mm) increments (the normal
1
254
increment is / " (0.5 mm)).
1
64
Note:
If you want to use "Fine Adjust Mode", please con-
tact your dealer (or service/maintenance pro-
vider).
[Fine Adjust Mode] is displayed on the Functions
screen if "Fine Adjust Mode" can be used.
If you press and highlight (in b/w) [Fine Adjust
Mode], "Fine Adjust Mode" is activated and you
can make print position adjustments in increments
of 1 / " (0.1 mm). The increments return to
254
(0.5 mm) when set to "OFF".
1 / "
64
Adjusting the Print Position [Print Position Adjustment] [1=2 Alignment]
Functions for Printing
117